model
FW14/08/28
FS32/20
Red5-Plus-Room (old: 03-DIN-CPU)
eBCON2
Red5-PLUS-1180
Red5-EDGE-634
Mango
LROC-400
OFHI
Apex
JACE8000 + UDMI driver
JACE8000 + Tyrrell UDMI driver, or eBMS/Iot Control + Tyrrell UDMI driver
EN-EDGE
JACE8000 + VAYANDATA UDMI driver
FC-102
notes
Not UDMI native device
as UDMI configuration
is done using web interface
of the device.
system.config.recieve is set to log level INFO instead of log level DEBUG
Chipset FM02
EasyIO UDMI Test Results - FW-08 V1.0b24_GS
Not UDMI native device
as UDMI configuration
is done using web interface
of the device.
system.config.recieve is set to log level INFO instead of log level DEBUG
Chipset FM01
EasyIO UDMI Test Results - FS-32 V3.0b62_GS
Publish telemetry frequency is the same for the gateway and the proxied device.
Device is publishing partial state message after config
Device does not parse
minimum config.
Keys are generated by the device and cannot be changed
Publish telemetry frequency is the same for the gateway and the proxied device.
Device is publishing partial state message after config
Device does not parse
minimum config.
Keys are generated by the device and cannot be changed
Publish telemetry frequency is the same for the gateway and the proxied device.
Device is publishing partial state message after config
Device does not parse
minimum config.
Keys are generated by the device and cannot be changed
Publish telemetry frequency is the same for the gateway and the proxied device.
Device is publishing partial state message after config
Device does not parse
minimum config.
Keys are generated by the device and cannot be changed
Serial number in state message is "unknown"
Exponential backoff has been implemented, but it is not strictly following the UDMI documentation as detailed on GitHub documentation
Current implementation of UDMI only supports a maximum of 10 proxy devices with 150 points per point set.
Device is not UDMI Gateway
Not supporting keys created by UDMI tools
Device is hosted on Enlighted cloud - no access to configuration
Long Root CA is not accepted due to its size, a short version of a Root CA should be used.
A maximum of 25 points is only allowed per device.
Exponential backoff has been implemented, but it is not strictly following the UDMI documentation as detailed on GitHub documentation